IRC BOATS

For Sale - Corby 29 "Mistress Margarita"

Corby 29 "Mistress Margarita"
Current IRC: 0.992
Year: 2005 (end)
Hull number: #07
Designer: John Corby

Dimensions:
Length overall: 8.80 m
Beam: 2.85 m 
Draft:1.98 m
Keel: cast iron fin with lead torpedo bulb
Displacement: 3,350 kgs
Ballast: 1,250 kgs

Engine: 

Yanmar 1GM10, 1 cylinder, diesel, Saildrive
Propellor: two blades folding
Fuel capacity: 33 litres

Rigging: 
J:3.65 m
P:11.5 m
E:3.95 m

General specifications:
Hull & deck: Female moulded closed cell foam cored GRP using isopthalic polyester and vinylester resins. 
Foam cored GRP moulded furniture
Foils: low centre of gravity cast iron fin with lead torpedo bulb
Deck equipment: Harken winches, Lewmar & Spinlock deck hardware,
Mast & rigging: 9/10th rig, aluminium mast, twin spreaders rig with Dyeform standing rigging and carbon spinnaker pole
Rigid boom vang
Hydraulic backstay
Electrical: 1 x 12v battery 
Switch panel, interior and navigation lights
Plumbing: Manual fresh water system to galley
Stainless steel sink with drain
Manual bilge pumps

Sails: 

Stratis by Doyle Sails,New Zealand,  
Mainsail
No. 1 light
No. 1 medium
No. 3 jib
Light asymetric spinnaker
Medium symetric spinnaker
Heavy asymetric spinnaker

Safety gear: Cat 4
Moored: in Hong Kong
Asking price: HKD 1,000,000 ( USD 128,250)
Comments: in excellent condition, very carefully maintained, inspection highly recommended

Good racing results  

Contact the broker

olivierdecamps@jebsenmarine.com

Corby 33 hull #08 for Sale

Corby 33 hull #08 in final stages, white hull and deck with blue lines, rig and sails. Engine and most of interior already fitted, 4-5 weeks away from completion.

EUR 108 000 ex VAT

GENERAL - CORBY 33:
Hull and Deck, female moulded foam cored GRP using vinylester resin, woven glass and closed cell foam with two moulded waterlines, main companionway hatch with sliding perspex and removable washboard. Laminated keel structure. 
Deck with fitted Harken and Spinlock deck-gear.
Fitted bulkheads (Gabon plywood) with fitted wood-trim.
Keel, Iron fin with lead torpedo bulb.
Aluminum rig, with dyform rigging and tapered carbon spinnaker pole.
Liros rope package. Guard-wires.
Corby IRC 33 "stainless pack"
Carbon rudder (both stock and blade) weight 9.3kg with alu. sleeves and bearings from JEFA 
Spinlock tiller extension

INTERIOR:
Interior fitted floorboards and 6 cushions. 
BEP switch panel, LED interior lights. and 2 x 12v marine batteries
Navigation lights fitted
Adjustable Chart-lamp.
Suunto sail compass installed and wired up.
Yanmar 3YM20 (20hp) sail-drive, full installation with vari fold, folding 2 blade prop. 
Engine room insulated and fitted with two inspection hatches. Moulded engine front cover with wooden handles. 

2 Stove burner, water supply with foot pump, flush Fore-Spars skin-fittings

WC fitted with flush Fore-Spars fittings.

2x Bilge pumps fitted, one inside one outside
Laminated cradle seats

Tack Tick Speed/Depth/Wind system with a total of 4 displays 

SAILS:
North Sails
3DL Main
3DL Jib Light/Medium
3DL Jib Heavy
S2 spinnaker (white)

CONTACT:
Fredrik Bergström
EMAIL: info@ircboats.com
PHONE: +46 708 346222

Corby 26 hull #02 for sale after sail trials

EUR 58 000 ex VAT

New April 2008
Lys 1,17

GENERAL - CORBY 26:
Hull and Deck, female moulded foam cored GRP using vinylester resin, woven glass and closed cell foam with two moulded waterlines, main companionway hatch with sliding perspex and removable washboard. Laminated keel structure. 
Deck with fitted Harken and Spinlock deck-gear.
Fitted bulkheads (Gabon plywood) with fitted wood-trim.
Keel, Iron fin with lead torpedo bulb.
Aluminum rig, with dyform rigging and carbon pole.
Liros rope package. 
Set of Guardwires.
Corby IRC 26 "stainless pack"
Carbon rudder (both stock and blade) weight 6.5kg with alu. sleeves and bearings from JEFA 
Spinlock tiller extension

INTERIOR:
Interior fitted floorboards and 4 cushions. 
Upgraded with BEP switch panel with digital display.
Fitted with 12 red LED interior lights.
2 x 12v marine batteries
Navigation lights fitted
Battery charger installed
Shorepower, EU plugs (adapter might be needed)
Powerbox with 'earth fail' device and two 220v sockets, EU plugs
Sony CD/Radio CDX-HR70 (new marine system) fitted with 2 watertight speakers (inside)
Adjustable Chartlamp.
Suunto sail compass installed and wired up.
Lombardini twin cylinder LDW/502 on saildrive, full installation with vari fold, folding 2 blade prop. 
Engine room fully insulated and fitted with 2 LED white lights and two inspection hatches. Moulded engine front cover with wooden handles. 
WC fitted with flush ForeSpars fittings.
2x Bilge pumps fitted, one inside one outside
Two Lewmar size 0 port-light fitted in the cockpit side.
Laminated cradle seats

SAILS:
New set North Sails SWE 2602 
3DL Main 
3DL Genoa
3DL Jib
S2 Spinnaker (white)
Racing bags

CONTACT:
Fredrik Bergström
EMAIL: info@ircboats.com
PHONE: +46 708 346222

For sale. Corby 36 - ‘Mustang Sally’

Corby 36 - ‘Mustang Sally’
LOA: 11.02
TCC: 1.077
BEAM: 3.10
DRAUGHT: 2.23M
DISPLACEMENT: 4790KG
ENGINE: Beta Marine
DESIGNER: John Corby
HULL COLOUR: White
BUILT: 1995
Keel Fin Replaced 2005

Construction
GRP-Foam Sandwich hull and deck, Steel/Lead Fin Keel. Carbon Fibre/Foam rubber on caged roller bearings. Racing trim interior finish

Mechanical:
Beta Marine 3 cylinder,fresh water cooled sail drive. Folding Gori-prop(NEW 2005) Max speed 7ish Knots.

Electrical:
2x108 AH Batteries.

Tankage:
Plastic fresh water tank, Plastic Fuel tank capacity 60L

Other Mechanicals:
2 Manual Bilge Pumps.

Accomodation:
3 Fixed double berths in separate cabins 2 Fixed single berths,2 pipe-cots,drop, leaf solid teak saloon table,engine under companionway,chart table and galley next to companionway.

Domestic Equipment:
2 burner gas stove(2005)and marine head. Pressurised hot water system,warm air Central heating to both aft cabins.
Navigational Equipment
B&G Hercules 790,full racing spec, 3xFFD s, 2x20:20. Log,wind speed/angle,depth, Gps plotter,Simrad 68 dsc vhf.

Spars/Rigging:
Sparcraft alloy masthead rig. 3 x inline spreaders. Navtech rod rigging.Forestay and backstay, replaced 2003,Twin tuff luff replaced 2007
Navtec Series 7 hydraulic backstay adjuster (rebuilt 2001/2002).

Winches:
6 Harken,self tailing 2x48(2005), 2x42, 2x32

Deck Equipment:
Tiller Steering, Carbon Spinnaker Pole (extended 2007) Danforth Anchor with chain and wrap, Fenders and Mooring lines, 2xJack stays Sheets and Guys, Flares and Horseshoe life ring and light.

Sails
UK Mc William.
Main Millenium (2005)
No 1 Light & heavy Millenium (2005).
0.6 Running Spinaker (2005)
0.75 A-sail (2005)
0.9oz AP Spinnaker (2003)
0.5oz VMG Spinnaker(2003)

Quantum:
Main IFM Fusion Kevlar(2004) Hardly used.
No 2 Genoa IFM Fusion Kevlar (2004)
No 3 Genoa IFM Fusion Kevlar (2004)
0.6oz Running Spinnaker (2004)
No 1 Heavy Genoa IFM Fusion Kevlar (2003)
No 1 Light Genoa IFM Fusion Kevlar (2003)

Sobstad:
3 IMX 40 Practice kites with 108sqm.

North Sails:
Kevlar/Carbon 3DL Main 2006 (Hardly used).
3DL Light/Med No 1 Genoa (2006)
3DL Med/Heavy No 1 Genoa (2006)
3DL Light/Med No 1 Genoa (2007) (not used)
3DL Med/Heavy No 1 Genoa (2007) (not used)
Code 2 VMG Spinnaker(2007)
Code 1.5 A-sail(2007)

Also:
Cradle included which is in Castlepoint Crosshaven.

Location: Crosshaven

Price: 100,000 Euro.

Contact:
Fredrik Bergström
Email: info@ircboats.com